Teamac Duracote Red Oxide Paint 5L
Teamac Duracote Red Oxide Paint 5L
Teamac Duracote Anti corrosive Red Oxide serves as a versatile primer and one-coat finish.
You can directly apply Teamac Duracote Anti corrosive Red Oxide on metal, either as a standalone coat or for enhanced protection. Suitable for both indoor and outdoor use.
Recommended Primer: Teamac Zinc Phosphate Primer
Finish: Gloss
Available in 1L, 2.5L, 5L and 20L.
Coverage 13 sqm per L.
Colours Available: Red.
Share
Available in other sizes:
Teamac Duracote Red Oxide Paint 1L Teamac Duracote Red Oxide Paint 2.5L Teamac Duracote Red Oxide Paint 20L
Product FAQs
Product FAQs
What is Teamac Duracote Red Oxide Paint used for?
It is primarily used as a primer on metal surfaces to prevent rust and corrosion. It’s commonly applied to gates, railings, structural steel, and other ferrous metals before a topcoat is added.
Does Teamac Duracote Red Oxide Paint prevent rust?
Yes, it is specifically formulated as an anti-corrosive primer. It creates a protective layer on metal surfaces to prevent rust formation.
Can I use Teamac Red Oxide Paint on non-metal surfaces?
No, it is designed for ferrous metal surfaces.
How should the metal surface be prepared before applying the paint?
The surface should be free from rust, grease, and dirt. Ideally, loose rust and old paint should be removed, and the surface should be cleaned with a solvent. In some cases, blasting or mechanical wire brushing may be required for better adhesion.
Can Duracote be overcoated?
Yes it can be overcoated with Teamac Anticorrosive Red Oxide Paint
How many coats of Red Oxide Paint are needed?
Two coats are generally recommended for optimal rust prevention and coverage.
What is the drying time for Teamac Duracote Red Oxide Paint?
The paint is typically touch dry in 5 hours, depending on the environmental conditions, and can be re-coated after about 12 hours.
Can I apply it with a roller or spray?
Yes, Teamac Duracote Red Oxide Paint can be applied with a brush, roller, or spray equipment. Thin the paint slightly if spraying for easier application.
How long does the Red Oxide coating last?
Duracote Red Oxide Paint can provide long-term protection against corrosion, extending the life of metal surfaces for several years.
Can it be used on galvanized metal?
Yes it can be applied to Galvanised Steel as long as it is T- Washed primer to painting with the Teamac Mordant Solution.
Application Method
Brush, Roller and Spray
Coverage
13 sqm per L
Finish
Gloss
Suitable Primers or Topcoats
Can be left as a finish or overcoated with Metalcote
Thinners
Thinners 14