Teamac Duracote Red Oxide Paint 2.5L

What is Teamac Duracote Red Oxide Paint used for?

It is primarily used as a primer on metal surfaces to prevent rust and corrosion. It’s commonly applied to gates, railings, structural steel, and other ferrous metals before a topcoat is added.

Does Teamac Duracote Red Oxide Paint prevent rust?

Yes, it is specifically formulated as an anti-corrosive primer. It creates a protective layer on metal surfaces to prevent rust formation.

Can I use Teamac Red Oxide Paint on non-metal surfaces?

No, it is designed for ferrous metal surfaces.

How should the metal surface be prepared before applying the paint?

The surface should be free from rust, grease, and dirt. Ideally, loose rust and old paint should be removed, and the surface should be cleaned with a solvent. In some cases, blasting or mechanical wire brushing may be required for better adhesion.

Can Duracote be overcoated?

Yes it can be overcoated with Teamac Anticorrosive Red Oxide Paint

How many coats of Red Oxide Paint are needed?

Two coats are generally recommended for optimal rust prevention and coverage.

What is the drying time for Teamac Duracote Red Oxide Paint?

The paint is typically touch dry in 5 hours, depending on the environmental conditions, and can be re-coated after about 12 hours.

Can I apply it with a roller or spray?

Yes, Teamac Duracote Red Oxide Paint can be applied with a brush, roller, or spray equipment. Thin the paint slightly if spraying for easier application.

How long does the Red Oxide coating last?

Duracote Red Oxide Paint can provide long-term protection against corrosion, extending the life of metal surfaces for several years.

Can it be used on galvanized metal?

Yes it can be applied to Galvanised Steel as long as it is T- Washed primer to painting with the Teamac Mordant Solution.