Teamac Metaclor Antifouling Primer 1L in Grey

What is Teamac Metaclor Antifouling Primer?

Teamac Metaclor Antifouling Primer is a chlorinated rubber-based primer designed to promote adhesion between the boat hull and antifouling coatings. It also provides a protective layer that enhances the longevity of antifouling systems.

What surfaces can I apply Teamac Metaclor Antifouling Primer to?

This primer is suitable for use on a variety of surfaces, including steel, wood, and GRP (Glass-Reinforced Plastic). It is primarily used on boat hulls below the waterline to prepare surfaces for antifouling paints.

Can I use Teamac Metaclor Primer on previously painted surfaces?

Yes, it can be applied over previously painted surfaces, provided they are in good condition, well-prepared, and compatible with chlorinated rubber-based primers. Sand and clean the surface before application to ensure proper adhesion.

How long does it take for Teamac Metaclor Antifouling Primer to dry?

It typically dries to the touch within 30 minutes, but it’s advisable to wait at least 8 hours between coats. Full curing occurs in 6 hours.

Can it be used above the waterline?

Teamac Metaclor Antifouling Primer is designed specifically for use below the waterline, as part of a system to prepare the hull for antifouling paint. For above-water applications, different primers are recommended.

What is the coverage of Teamac Metaclor Antifouling Primer?

The coverage is approximately 8.5-10 square meters per litre, depending on the application method used.

Is Teamac Metaclor Antifouling Primer compatible with all antifouling paints?

It is compatible with most chlorinated rubber-based and solvent-based antifouling paints. Always check for compatibility with technical services especially if applying over a different type of antifouling system.