Teamac Boottopping 1L
Teamac Boottopping 1L
Discover ultimate protection and a sleek finish for your boat with our premium boot topping paint.
Our boot topping paint offers uncompromising defence against harsh marine elements, ensuring easy application and lasting durability. Specially designed for the area of the hull between the waterline and the load line, it provides a resilient surface that resists marine growth and can be easily polished to remove accumulated grime.
Designed for the waterline.
Suitable for: Aluminium, Steel, Wood, GRP.
Available in 1L, 2.5L, 5L.
Share
Product FAQs
Product FAQs
What is Teamac Boottopping paint?
Teamac Boottopping paint is a specialized marine coating
designed for the boottop area of a vessel, which is the section of the hull
between above the waterline and below the waterline. It provides a durable,
high-gloss finish that can withstand periodic immersion and exposure to the
marine environment.
What surfaces can it be applied to?
Teamac Boottopping paint can be applied to various surfaces,
including suitably prepared and primed steel, wood, aluminium, and fiberglass.
It is specifically formulated for use on the boottop area of boats and ships.
How should the surface be prepared before applying Teamac
Boottopping paint?
The surface should be clean, dry, and free from rust, dirt,
grease, and other contaminants. Proper surface preparation involves sanding,
degreasing, and sometimes priming, depending on the material and its condition.
How is Teamac Boottopping paint applied?
The paint can be applied using a brush, roller, or spray
equipment. It is important to follow the manufacturer's instructions for
mixing, thinning and application to achieve the best results.
What is the coverage rate of Teamac Boottopping paint?
The coverage rate is approximately 12 square meters per litre,
depending on the surface porosity and application method. It's advisable to
check the product datasheet for precise coverage information.
How long does it take for Teamac Boottopping paint to
dry?
Drying times can vary based on environmental conditions, but
typically it is touch dry within 4 hours and hard dry within 12 hours. Full
curing can 5 to 7 days.
Is Teamac Boottopping paint resistant to marine
conditions?
Yes, Teamac Boottopping paint is designed to withstand the
harsh conditions of the marine environment, including exposure to saltwater, UV
light, and periodic immersion.
Can Teamac Boottopping paint be applied over anti-fouling
paint?
It is generally not recommended to apply boottopping paint
directly over anti-fouling paint without proper preparation. The anti-fouling
layer should be sanded to create a suitable surface for adhesion, and it is
advisable to apply a suitable primer if necessary.
What colours are available for Teamac Boottopping paint?
Teamac Boottopping paint is available in Blue, Red, Grey,
Black and White.
How should equipment be cleaned after using Teamac
Boottopping paint?
Equipment used for applying Teamac Boottopping paint should
be cleaned immediately after use with Teamac Thinners 14 to prevent the paint
from hardening on the equipment.
Application Method
Brush, Roller or Spray
Coverage
12 sqm per L
Finish
Gloss
Suitable Primers or Topcoats
Marine Primer Undercoat
Thinners
Thinners 14