Rapidry Red Oxide Primer 2.5L

What surfaces can Teamac Rapidry Red Oxide Primer be applied to?

It is mainly used on ferrous metals such as steel and iron. It provides an anti-corrosive base coat that prevents rust formation.

How long does Teamac Rapidry Red Oxide Primer take to dry?

It is fast drying and can be touch dry within 30 minutes.

Can this primer be used for exterior surfaces?

Yes, it can be used for both interior and exterior surfaces. It’s particularly effective in outdoor environments due to its anti-corrosive properties.

What type of topcoats can be applied over Teamac Rapidry Red Oxide Primer?

The top coat that would go over this primer is Teama Rapidry QD Enamel

Does the metal surface need to be prepped before applying this primer?

Yes, for best results, metal surfaces should be cleaned of rust, oil, grease, or any contaminants. Surfaces should be abraded to improve adhesion.

How many coats of Teamac Red Oxide Primer should I apply?

Typically, 1 to 2 coats are sufficient, depending on the surface condition and exposure to harsh environments.

What’s the coverage rate of Teamac Rapidry Red Oxide Primer?

It typically covers around 13 square meters per litre

What’s the recommended application method?

It can be applied using a brush or spray gun. For large surfaces, spray application is often recommended for speed and even coverage.

Is Teamac Red Oxide Primer suitable for high-temperature environments?

While it provides good corrosion resistance, it is not designed for high-temperature exposure (such as industrial ovens or furnaces). Specialized primers would be required for that.

How should I clean brushes or tools after use?

Cleaning can be done using Teamac Thinners 16 immediately after application.